Mahros Darsin, Ph.D

Mahros Darsin, S.T., M.Sc., Ph.D.

 

 

Phone: +62 331 410 243 ext 118

Email: mahros.teknik@unej.ac.id

 

Qualifications:

  • S.T. (Mechanical Engineering – 1993), ITS, Surabaya – Indonesia
  • M.Sc. (Advanced Manufacturing Technology – 2004), University of Portsmouth, Portsmouth – The United Kingdom
  • Ph.D. (Mechanical Engineering – 2018), Auckland University of Technology, Auckland – New Zealand

Memberships and Affiliations:

  • Society of Manufacturing Engineers (SME)
  • Hong Kong Society of Mechanical Engineers (HKSME)
  • International Association of Engineers (IAENG)

Biography:

Academic and Industrial Experience:

  • 1995 – 2003 : Lecturer, University of Jember, Indonesia
  • 2003 – 2008 : Senior Lecturer, University of Jember, Indonesia
  • 2008 – present: Associate Professor, University of Jember, Indonesia
  • 1999           : Shop assistant, Akram’s Oriental Supermarket, Portsmouth, The United Kingdom
  • 2014-2018 : Casual Steward, Hipgroup, Auckland, New Zealand

 

Project Experience:

 

  • Kusno, A. Cahya, Darsin, “Modelisasi Benda Onyx dan Marmer melalui Penggabungan dan Pemilihan Parameter Pengubah Bentuk Permukaan Putar Bezier” Ristek, 2007
  • W.S. Wahyuni, M. Darsin, A.Z. Muttaqin. ”Pembuatan Wadah Pengomposan untuk Mengolah Sampah Sayur Menjadi Biopestisida”, Ristek, 2007
  • Tasliman, Darsin, Askin, “Rancang Bangun dan Pengujian Mesin Pendingin Sistem Adsorpsi Bertenaga Surya untuk Pengawetan Bahan Pertanian di Pedesaan”. HB DP2M, 2007
  • H.A. Basuki, M. Darsin, T. Lindriarti, “Pengembangan Plastik Biodegradabel dari Bungkil Biji Jarak Pagar dengan cara Kompresi”. HB DP2M, 2008
  • M. Darsin, Y. Hermawan, H.A. Basuki, “Rancang Bangun Mesin Bubut Fotokopi untuk Meningkatkan Kualitas Kuantitas dan Efisiensi pada pembubutan Benda Putar dari Marmer” HB DP2M tahun I, 2009
  • M. Darsin, H.A. Basuki, “Rancang Bangun Mesin Bubut Fotokopi untuk Meningkatkan Kualitas Kuantitas dan Efisiensi pada pembubutan Benda Putar dari Marmer” HB DP2M tahun II, 2010
  • D.L. Setyawan, N. Ilminnafik, M. Darsin, H. Sutjahjono, “Teknologi Pembuatan Briket Ampas Tebu dan Serbuk Gergajian Kayu sebagai Bahan Alternatif yang Ramah Lingkungan”. Dana BOPTN desentralisasi

 

Teaching Areas:

  • Manufacturing Processes
  • Advanced Manufacturing Technology
  • Industrial Metrology
  • Metals
  • Materials Science

Research Areas:

  • Materials Science:  Metal Heat Treatments, Solid State Welding, Materials Characterization
  • Manufacturing Technology: Machining and Machinability, Modeling and Simulation of Manufacturing, Optimization of Manufacturing Processes

Publications:

International Journal:

National Journal:

  • M. Darsin, A.Z. Muttaqin, 2005. “Rancang Bangun Penanak Nasi Otomatis dengan Memanfaatkan Kompor Minyak Tanah”. Jurnal Teknik Pertanian Universitas Jember Vol.2, No 1 April
  • M. Darsin, 2006. “Tool Life Monitoring System”. Jurnal Elevasi, Fakultas Teknik Univ Muhammadiyah Jember vol.01 no.04
  • M. Darsin, 2006. “Penerapan Model Jalur Kritis untuk Menurunkan Waktu Proses Manufaktur Kemasan di PT.X”. Jurnal Interdisipliner Universitas Islam Jember vol 5 no 1 hal 57 – 66.
  • Kusno, A. Cahya, M. Darsin, 2007. “Modelisasi Benda Onyx dan Marmer melalui Penggabungan dan Pemilihan Parameter Pengubah Bentuk Permukaan Putar Bezier”. Jurnal Ilmu Dasar (Terakreditasi), FMIPA Universitas Jember Vol.8 No.2 hal.175 – 185, Juli 2007.
  • A. Syuhri, M. Darsin, A.H. Setyawan, 2007. “Kajian Ergonomi terhadap Kick Starter Sepeda Motor Matik Berdasarkan Analisis Selera Komunitas Matik Kabupaten Jember “. Jurnal Elevasi, Fakultas Teknik Univ Muhammadiyah Jember vol.01 no.05 hal 10 – 23.
  • H.A. Basuki, T. Lindriarti, M. Darsin, 2009. “Pengembangan Compression Molding dalam Pembuatan Biodegradabel Plastik dari Bungkil Jarak Pagar “. Jurnal Rotor, F Teknik Universitas Jember vol.2 no.2. hal 9 – 17.
  • M. Darsin, A. Sanata, A.A. Arianto, 2009 “Pemilihan Nose Radius untuk Mendapatkan Kekasaran Permukaan Minimum pada Pembubutan Batu Marmer”. Jurnal Elevasi, F,Teknik Univ. Muhammadiyah Jember; vol 02 no.09 hal 34 -41
  • M. Darsin, S. Junus, Y.I. Triawan, 2010. “Analisis Sifat Mekanik dan Struktur Mikro Paduan Aluminium 5083 Akibat Pengelasan MIG dengan Variasi Preheat dan Post Heat”. Jurnal Rotor Vol.3 No.2 Juli 2010.
  • A. Syuhri, M. Darsin, H. Ar-Rasyid, 2010. ” Penentuan Waktu Perawatan dan Penggantian Komponen Kritis dengan Biaya Minimal pada Divisi Blow Molding”. Jurnal Rotor Vol.3 No.2 Juli 2010.
  • M. Darsin, A. Effan, A. Setiawan, 2010. “Variasi Kekerasan pada Baja Karbon Rendah (ST 37) Akibat Perlakuan Tempering setelah Proses Double Hardening”. Jurnal Rekayasa Vol.7 No.2 Desember 2010.
  • M. Darsin, F.X. Kristianta, H. Fansuri, 2011. “Optimasi Laju Pengerjaan Material dan Kekasaran Permukaan pada Proses Electrical Discharge Machining Die-Sinking”. Jurnal Tekno vol 15 no1 hal 37 – 47, Maret 2011.
  • H. Arbiantara, S. Mulyadi, M. Darsin, A. Syuhri, “Pengaruh sudut helix dan compression ratio ulir terhadap nilai kecepatan alir, shear rate, perubahan tekana, viskositas dan tegangan geser”. Jurnal Rekayasa, vol.8 no.1. hal 132-139, Juli 2011.
  • H. Arbiantara, S. Mulyadi, M. Darsin, A. Syuhri, “Pengaruh sudut helix dan compression ratio ulir terhadap nilai kecepatan alir, shear rate, perubahan tekana, viskositas dan tegangan geser”. Jurnal Rekayasa, vol.8 no.1. hal 132-139, Juli 2011.
  • A.S.F. Pamungkas, Sumarji, M. Darsin, 2012. “Analisis Sifat Mekanik Hasil Pengelasan Aluminum AA1100 dengan Metode Friction Stir Welding (FSW)”. Jurnal Rotor, Vol 5 No 1, Januari 2012.
  • R.P. Aditama, M. Darsin, Sumarji, 2012. “Perubahan Nilai Kekerasan dan Struktur Mikro Baja H13 Akibat Variasi Arus pada Proses Electrical Discharge Machining (EDM) Sinking Menggunakan Elektroda Grafit”. Jurnal Tekno Universitas Negeri Malang Vol 17 No 1, hal 66 – 72, Maret 2012.
  • I Made Ivan W.C.S, M. Darsin, Moch. Edoward R., 2019 “Aplikasi Overal Equipment Effectiveness (OEE) dalam upaya mengatasi tingginya downtime pada stasiun ketel PG X Jawa Timur”. Jurnal Multitek Indonesia Vol.13 no. 2. hal 15-22, Dec 2019. http://journal.umpo.ac.id/index.php/multitek/article/view/1614
  • H.I.N. Iman, M. Darsin, R.R. Sakura, 2019 “Analisis Ketebalan Lapisan pada Pengecatan Baja Karbon Rendah menggunakan Metode Respons Permukaan”. SINTEK JURNAL, Vol. 13 No. 2, hal 65-72, Desember 2019. https://jurnal.umj.ac.id/index.php/sintek/issue/view/369/showToc
  • T.S Hutama, M. Darsin, S. Mulyadi, 2019. “Optimasi variasi diameter nozzle, tekanan udara dan suhu pengeringan pada pelapisan baja St371 menggunakan metode Response Surface”. Jurnal SIMETRIS, Vol. 10 No. 2 November 2019 https://jurnal.umk.ac.id/index.php/simet/article/view/3490
  • H.P. Guna, M. Darsin, A.A. Rosyadi, 2019. “Optimasi kekilapan pada pengecatan pelat St37 dengan metode respon permukaan”. Jurnal Polimesin. Volume 17, Nomor 2, Agustus 2019 http://e-jurnal.pnl.ac.id/index.php/polimesin/article/view/938
  • M.F. Tsani, H. Sutjahjono, M. Darsin, 2020. “Pengaruh model reflector terhadap performa kolektor tabung dengan phase change materials”. Dinamika Teknik Mesin 10(1) (2020) 53-59. http://dinamika.unram.ac.id/index.php/DTM/article/view/312

 

International Conference:

  • S.Hamat, M.S. Hussin, S.A.S. Ali, M.A.A. Fozi, Y.A. Rahim, M.S.I.M. Dawi and M. Darsin. “Experimental & finite element modeling of partial infill patterns for thermoplastic polymer extrusion 3D printed using elasto-plastic method”. International Conference on Climate Change and Sustainable Engineering in ASEAN (CCSE-ASEAN), 13-14 November 2019, Engineering Faculty, University of Jember, Indonesia
  • Nuri, M. Darsin and R.K.K.Wibowo “Study on characteristics of calophyllum inophyllum oil as a new alternative cutting fluid”. International Conference on Climate Change and Sustainable Engineering in ASEAN (CCSE-ASEAN), 13-14 November 2019, Engineering Faculty, University of Jember, Indonesia
  • M. Darsin, T. Pasang and Z. Chen. “Effect of heat treatment on drillability of titanium alloy 6Al-2Sn-4Zr-6Mo”. International Conference on Smart Green Technology, State Polytechnic of Malang, Malang, Indonesia, August 27-28, 2018.
  • M.Darsin, D. Dwilaksana, T. Pasang and Z. Chen. “Study on effect of heat treatment on chips formation and forces in drilling titanium alloy 6Al-2Sn-4Zr-6MoStudy on effect of heat treatment on chips formation and forces in drilling titanium alloy 6Al-2Sn-4Zr-6Mo”. International Conference on Smart Green Technology, State Polytechnic of Malang, Malang, Indonesia, August 27-28, 2018.
  • M. Darsin, T. Pasang, Z. Chen, “Drillability of Titanium Alloy 6Al-2Sn-4Zr-6Mo: Cutting Forces Point of View”. The 3rd International Conference on Precision Machinery and Manufacturing Technology. Auckland, February 4-8, 2018.
  • M. Darsin, T. Pasang, and Z. Chen, “Drillability of Titanium 6246 Alloy,” in Processing and Fabrication of Advanced Materials-XXV, 2017, pp. 856–863. Presentation in International Conference on Processing and Fabrication of Advanced Materials (PFAM –XXV), Auckland, January 2017.
  • M. Darsin, T. Pasang, and Z. Chen, “A Study of Chips Formation in Drilling Ti-6146 Alloy”. Presentation in the 28th New Zealand Conference on Microscopy (MNZ), Auckland, January 2017.
  • M. Darsin, H. Sutjahjono, A. Hadi, “Mechanical Properties and Micro Structure of Aluminum Alloys [Al-Mg-Si] as Results of Variation Time in Friction Welding”. Presentation in International Conference on QiR (Quality in Research), Jogjakarta, Indonesia, June 2013.
  • M. Darsin & H.A. Basuki, “Development machining of titanium alloys: a review”. Presentation in the 1st International Conference on Mechanical Engineering (ICOME), Lombok, Indonesia, September 2013.
  • M. Darsin, “Redesign of Motorcycle Part through Quality Function Deployment (QFD)”. Presentation in the 3rd International Conference on Product Design & Development, Engineering Faculty, Gadjah Mada University, Jogjakarta, Indonesia, 12 December 2013.
  • M. Darsin, Y. Hermawan, A. Rachmat, “Variation of Surface Roughness on Electrical Discharge Machining Die-Sinking Caused of Different Electrode Material, Current, and On Time”. Presentation in the 12th International Conference on QiR (Quality in Research), Bali, Indonesia, July 2011
  • M. Darsin, Y. Hermawan, T. Kristiyantoro, “Optimization of Cycle Time by Response Surface Method in Manufacturing Chamomile 120 ml Bottle Using Blow Molding Process”. Presentation in the 11th International Conference on QiR (Quality in Research), Jakarta, Indonesia, May 2009.

 

National Conference:

  • B. Irawan, S. Hadi, F. Rohman, M. Darsin, “Pemilihan kapasitas baterai penyimpan energi listrik dari energi surya”, Seminar Nasional Teknik Mesin (SISTEM) 2018. Universitas Jember, 10 November 2018.
  • M. Darsin, H.A. Basuki, D. Dwilaksana, D. Djumhariyanto. “Studi tentang bentuk tatal pada penggurdian paduan titanium 6246”. Seminar Nasional Teknik Mesin (SISTEM) 2018. Universitas Jember, 10 November 2018.

 

Invited Speakers:

  • Tutor in Materials Science and Technology Development on “Culture Immersion batch V”, University of Jember, 8th – 16th November 2018.
  • Speaker in “Students Induction Program”, Engineering Faculty, University of Jember, 13th – 17th August 2018

Book:

  • M. Darsin, “Proses Permesian non-Kovensional”, Jember University Press, ISBN: 979-8176-80-4, tahun 2010
  • M. Darsin, “Proses Manufaktur Dasar”, Jember University Press, ISBN: 979-8176-8, tahun 2011