Program Studi Magister Teknik Mesin

Fakultas Teknik Universitas Jember

Dr. Yuni Hermawan, S.T., M.T.

Dr. Yuni Hermawan, S.T., M.T.

 

Phone: +62 331 410 243 

Email: yunikaka@unej.ac.id

 

Qualifications:

  • Sarjana Teknik, Institut Teknologi Sepuluh Nopember, INDONESIA, 2000
  • Magister Teknik, Institut Teknologi Sepuluh Nopember, INDONESIA, 2007
  • Doktor, Universitas Brawijaya, Indonesia, 2021

Memberships and Affiliations:

Biography:

Academic and Industrial Experience:

  • 2002 – present: Lecturer, University of Jember, Indonesia

 

Project Experience:

  • Yuni Hermawan, 2017. “Aplikasi Sistem Pemotongan Orthogonal Dan Rake Angle Negatif Pada Pembubutan Material Getas Batu Marmer. Ketua, Hibah Disertasi Doktor.
  • Yuni Hermawan, 2017. “Teknologi Komposit Partikel Semen-serat Tebu Sebagai Elemen Peredam Getaran Pada Konstruksi Mesin Perkakas”. Anggota, Produk Terapan.
  • Yuni Hermawan, 2014. “Manufaktur Biokomposit Laminat Serat Tebu – Polyester Sebagai Bahan Alternatif Pengganti Struktur Logam Body Mobil Listrik”. Ketua, Hibah Bersaing.
  • Yuni Hermawan, 2014. “Rekonstruksi Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) Guna Memberdayakan Masyarakat Lereng Hutan Gunung Raung Menuju Desa Mandiri Energi”. Ketua, Hibah Pengabdian Kemitraan (PPK). Anggota, Hibah Pengabdian Kemitraan (PPK).
  • Yuni Hermawan, 2021. “Ipteks Bagi Kelompok Tani Lahan Kritis Menuju Pertanian Swasembada Pupuk”. Ketua, Hibah Pengabdian Kemitraan (PPK).
  • Yuni Hermawan, 2020. “Ipteks Bagi Produk Ekspor Krupuk Kromoleyo”. Anggota, Hibah Pengabdian Kemitraan (PPK).
  • Yuni Hermawan, 2020. “Optimalisasi Pembangkit Listrik Tenaga Mikro Hidro (pltmh) Menuju Desa Mandiri Energi Di Pedesaan Kabupaten Banyuwangi”. Ketua, Hibah Pengabdian Kemitraan (PPK).
  • Yuni Hermawan, 2019. “Pengembangan Kelompok Usaha Bersama Krupuk Singkong Di Desa Tegalrejo Kecamatan Tegalsari – Kabupaten Banyuwangi Provinsi Jawa Timur”. Anggota, Hibah Pengabdian Kemitraan (PPK).

 

Teaching Areas:

  • Research Method
  • Technical Analysis I
  • Industrial Metrology
  • Capstone Design
  • Manufacturing Automation

Research Areas:

  • Manufacturing Technology: Machining of Hard Materials

Publications:

International Journal:

  • Mahros Darsin, Reinaldi Luthfi Amir, Hary Sutjahjono, Moch. Edoward Ramadhan, Yuni Hermawan, Moch. Agus Choiron, 2022. The Effect of Nozzle Temperature, Layer Height, and Infill Pattern on Dimensional Accuracy and Flexural Strength of 3D Printed Cu-PLA Filaments . Gongcheng Kexue Yu Jishu/Advanced Engineering Science. 54(3). https://www.gkyj-aes-20963246.com/article/the-effect-of-nozzle-temperature-layer-height-and-infill-pattern-on-dimensional-accuracy-and-flexural-strength-of-3d-printed-cu-pla-filaments

    Yuni Hermawan, Fauzi Aldino, Erwin Renanda Wijaya, Agung Sofirullah Annas, Masrukin. 2022. Design and Fabrication of Double Actions of Agricultural Waste Chopper: a Community Empowerment Inspired. International Journal of Emerging Trends in Engineering Research. 10(5). Available Online at http://www.wahttps://doi.org/10.30534/ijeter/2022/031052022

    Mahros Darsin, Nofa Kirana Pratama, Rika Dwi Hidayatul Qoryah, Yuni Hermawan, Mochamad Asrofi, Hari Arbiantara Basuki, Ahmad Syuhri, Dwi Djumhariyanto, Robertus Sidartawan, Dedi Dwilaksana,. 2022. Study of Chip Formation in Turning of AISI 4340 under Minimum Quantity Lubrication (MQL). Gongcheng Kexue Yu Jishu/Advanced Engineering Science. 54(2). https://www.gkyj-aes-20963246.com/article/study-of-chip-formation-in-turning-of-aisi-4340-under-minimum-quantity-lubrication-mql

    Hari Arbiantara Basuki, Yuni Hermawan, Salahuddin Junus, Mahros Darsin, Rika Dwi Hidayatul Qoryah, , . 2022. Optimizing the Surface Roughness AISI 4340 Steel on Turning Process under Minimum Quantity Lubrication (MQL). Materials Science Forum. 1057(). https://www.scientific.net/MSF.1057.167

    Rika Dwi Hidayatul Qoryah, Hari Arbiantara Basuki, Yuni Hermawan, Salahuddin Junus, Mahros Darsin, . 2022. Optimizing the Surface Roughness AISI 4340 Steel on Turning Process under Minimum Quantity Lubrication (MQL). Materials Science Forum. 1057(-). https://www.scientific.net/MSF.1057.167

    Mochamad Asrofi, Rika Dwi Hidayatul Qoryah, Sumarji, Yuni Hermawan, Sujito, Asnawi, Prof. Ir. Dr. S.M. Sapuan, R.A. Ilyas, A. Atiqah. 2021. Effect of alkali treatment of piper betle fiber on tensile properties as biocomposite based polylactic acid: Solvent cast-film method. Materials Today: Proceedings. xx(xx). https://doi.org/10.1016/j.matpr.2021.02.218

    Ririn Endah Badriani, Dwi Djumhariyanto, Santoso Mulyadi, Yuni Hermawan, Alex Tresa Elsyamba. 2020. Contact Ball Bearing On Rolling Resistance. INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH. 09(01). https://www.ijstr.org/final-print/jan2020/Contact-Ball-Bearing-On-Rolling-Resistance.pdf

    Yuni Hermawan, Prof. Dr. Ir. Rudy Soenoko, M.Eng.Sc, Dr. Eng. Yudy Surya Irawan, ST, M.Eng, Dr. Eng. Sofyan Arief Setyabudi, ST, M.Eng. 2020. Cutting Forces, Chips Formation and Surface Roughness in Rock Cutting Using Negative Rake Angle. Manufacturing Technology. 20(1). https://journalmt.com/artkey/mft-202001-0009_cutting-forces-chips-formation-and-surface-rou ghness-in-rock-cutting-using-negative-rake-angle.php

    Yuni Hermawan, , Prof. Dr. Ir. Rudy Soenoko, M.Eng.Sc, Dr.Eng. Yudy Surya Irawan, ST, M.Eng, Dr.Eng. Sofyan Arief Setyabudi, ST, M.Eng. 2019. Minimizing Temperature And Tool Wear on Rock Cutting with Negative Rake Angle. MM – Science Journal. April 2019(02). https://www.mmscience.eu/journal/issues/june-2019/articles

    Yuni Hermawan, Prof. Dr. Ir. Rudy Soenoko, M.Eng.Sc, Dr. Eng. Yudy Surya Irawan, ST, M.Eng, Dr. Eng. Sofyan Arief Setyabudi, ST, M.Eng. 2019. Minimizing Temperature and Tool Wear on Rock Cutting with Negative Rake Angle. MM-Science Journal (MMSJ). 2019(2). https://www.mmscience.eu/journal/issues/june-2019/articles/minimizing-temperature-and-tool[1]wear-on-rock-cutting-with-negative-rake-angle

    Dwi Djumhariyanto, Santoso Mulyadi, Yuni Hermawan, Triwahju Hardianto, Robertus Sidartawan, . 2018. Analysis of Tool Vibration with Composite Damper of Cement-Sugar Cane Fiber on Turning Process Without Tailstock. International Journal of Mechanical Engineering and Technology (IJMET). 9(11). http://www.iaeme.com/IJMET/index.asp

    Triwahju Hardianto, Dwi Djumhariyanto, Robertus Sidartawan, Santoso Mulyadi, Yuni Hermawan, . 2018. Analysis of Effect Principal Cutting Angle to Stability of Tools Vibration with Cement-Sugar Cane Fiber Composite Damping. International Journal of Latest Engineering Research and Applications (IJLERA). 3(11). www.ijlera.com

    Santoso Mulyadi, Yuni Hermawan, . 2017. Influence of Addition Steel Powder on Characteristics Biocomposite cements-Fiber Sugarcane Powder. International juornal of Latest Engineering Research and Application (IJLERA ). 02(09).

National Journal:

Mochamad Asrofi, Sujito, Santoso Mulyadi, Yuni Hermawan, Salahuddin Junus, Afril Priyanto, Devita Amelia. 2021. Aplikasi Serat Alam Muntingia calabura sebagai Pengisi dalam Biokomposit Bermatriks Polivinil Alkohol (PVA): Karakteristik Sifat Kuat Tarik dan Permukaan Patahan. Agroteknika. 4(1).

Yuni Hermawan, Mochamad Asrofi, Sujito, Santoso Mulyadi, Salahuddin Junus, Devita Amelia, Afril Priyanto. 2021. Aplikasi Serat Alam Muntingia calabura sebagai Pengisi dalam Biokomposit BermatriksPolivinil Alkohol (PVA): Karakteristik Sifat Kuat Tarik dan Permukaan Patahan. Agroteknika. 4(1). https://doi.org/10.32530/agroteknika.v4i1.103

Robertus Sidartawan, Yuni Hermawan, . 2017. UJI TABRAK KOMPONEN PINTU DAN BAMPER MOBIL LISTRIK BERBAHAN KOMPOSIT SERAT TEBU DENGAN METODE ELEMEN HINGGA. ROTOR. 9(2). http://repository.unej.ac.id/handle/123456789/80133

Robertus Sidartawan, Yuni Hermawan, . 2016. UJI TABRAK KOMPONEN PINTU DAN BAMPER MOBIL LISTRIK BERBAHAN KOMPOSIT SERAT TEBU DENGAN METODE ELEMEN HINGGA. ROTOR (Jurnal Ilmiah Teknik Mesin). 9(2).

Yuni Hermawan, Robertus Sidartawan, . 2016. UJI TABRAK KOMPONEN PINTU DAN BAMPER MOBIL LISTRIK BERBAHAN KOMPOSIT SERAT TEBU DENGAN METODE ELEMEN HINGGA. ROTOR (Jurnal Ilmiah Teknik Mesin). 9(2).

International Conference:

  • Hari Arbiantara Basuki, Salahuddin Junus, Yuni Hermawan, Rika Dwi Hidayatul Qoryah,
    Mahros Darsin, . 2022. Optimizing the Surface Roughness AISI 4340 Steel on Turning Process
    under Minimum Quantity Lubrication (MQL). Engineering, Science and Technlogy.
  • Salahuddin Junus, Mahros Darsin, Hari Arbiantara Basuki, Yuni Hermawan, Rika Dwi
    Hidayatul Qoryah, Mochamad Bayu Ramadhani. 2022. Optimizing the Surface Roughness AISI
    4340 Steel on Turning Process under Minimum Quantity Lubrication (MQL). .
  • Yuni Hermawan, Intan Hardiatama, Ahmad Syuhri, Hari Arbiantara Basuki, Rika Dwi
    Hidayatul Qoryah, Dwi Djumhariyanto, Robertus Sidartawan, Danang Yudistiro, Mahros
    Darsin, Maulana Muhammad Firdaus. 2021. Progression in Designing and Fabrication of
    Minimum Quantity Lubrication (MQL) System with an Arduino based Controller. Engineering.
  • Robertus Sidartawan, Dwi Djumhariyanto, Triwahju Hardianto, Yuni Hermawan, Santoso
    Mulyadi, . 2018. Analysis Stress and Displacement Cement Composite of 3-Axial Force Effect
    On Turning Process Aluminium 6061. -.
  • Santoso Mulyadi, Salahuddin Junus, Yuni Hermawan, . 2017. Desain and Stress Analysis
    Cement Composite On Turning Tools Structure.

 

Naskah Akademik/Legal Opinion/Memorandum:

  • Yuni Hermawan, Intan Hardiatama, Ahmad Syuhri, Hari Arbiantara Basuki, Rika Dwi
    Hidayatul Qoryah, Dwi Djumhariyanto, Robertus Sidartawan, Danang Yudistiro, Mahros
    Darsin, Maulana Muhammad Firdaus. 2020. Progression in Designing and Fabrication of
    Minimum Quantity Lubrication (MQL) System with an Arduino based Controller. Fakultas
    Teknik, Universitas Muhammadiyah Surakarta
  • Robertus Sidartawan, Yuni Hermawan, . 2017. Analisa Sifat Mekanis Biokomposit Laminat
    Serat Tebu – Polyester